| HZ 100 & HZ 300 |
 |
 |
 Product features
The HZ 100 and HZ 300 hydrocyclones are mechanical components with a cylindrical to conical shape that are used for separating fine particles from suspensions by means of centrifugal force.
The size of particles filtered out during the separation process is subject to the size of the cyclone, particle size, suspension viscosity as well as the pressure inside the cyclones.
The primary advantages of hydrocyclones are their simplicity and efficiency in construction and design.
Properties and functions:
-Polyurethane for ensuring a higher level of protection against abrasion
Functioning
Inside the hydrocyclone, the suspension entering the device is stirred and set into a circular motion. In turn, this gives rise to centrifugal forces which get stronger towards the bottom of the hydrocyclone due to its conical design. This way, the small solid particles in the suspension are tossed against the inner wall of the hydrocyclone, separated at a characteristic cut-point and removed at the cyclone underflow. The purified liquid containing particles smaller than the cut-point will leave the hydrocyclone via the cyclone overflow.
Transport dimensions
-Internal diameter: -Length: -Width: -Weight:
-Internal diameter: -Length: -Width: -Weight:
Technical specifications
-Cut-point (d50): 20 µm -Operating pressure requirement: 2.4 – 2.8 bar -Flow rate: 227 l/m and/or 13.8 m3/h*
-Cut-point (d50): 60-80 µm -Operating pressure requirement: 2.4 – 2.8 bar -Flow rate: 1893 l/m and/or 113.5 m3/h*
* Subject to the properties of the material to be treated. The flow rate indicated above represents the minimum flow rate (at 2.5 bar). The above specifications refer to one hydrocyclone. Tags:
|
|