| ITE Mini 4 HDD |
 |
 |
 Description
The ITE MINI4 HDD separation plant is specially designed for HDD drilling applications and dewatering of slurries (up to 50 m³/h).
Due to the small dimensions, the ITE MINI 4HDD separation plant guarantees minimum setup times and an easy transport. The plant is immediately ready for operation on site and does not require any time-consuming connection work. The ITE MINI4 HDD cleans slurries down to 30 µm. Platforms and handrails ensure safe working and allow optimum access to the individual plant components.
The ITE MINI4 HDD Separation plant is equipped with:
Dimensions for transport
Technical specifications
Capacity (as per spec. below) *[1]: max. 50 m3/h
Power consumption (total plant): approx. 49 kW
-Hydrocyclones - Quantity: 4 pcs. - Cyclone size: - Cut-point (d50): 30- 45 µm*1
- Quantity: 2 pcs. - Screen area (per screening machine): - Angular adjustment: 0° to +3°
-Power supply - Rated power (total) (4x3 kW): 12.0 kW - Voltage: 400 V / 50 Hz
-Scalping screens - Quantity: 3 pcs. (on screening machine #1) - Screen area (total):
-Fine screens - Quantity: 3 pcs. (on screening machine #2) - Screen area (total):
-Centrifugal pump 6 x 5 x 14 with mechanical seal - Desanding cycle (4 x 6“): max. 140 m3/h
-Power supply - Rated power: 37 kW - Voltage: 400 V / 50 Hz
Tank capacity: approx. *[1] The capacity of the ITE MINI4 HDD is subject to the viscosity and density of slurry, solids loading, grain size distribution, screen selection, and properties along with operating conditions, and might be actually lower than specified. Tags:
|
|